Motorola SBG900 - Manual (Page 29)

23 SBG900 User Guide
Home
X
Exit Print
Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless USB
5 Click Log In to display the SBG900 user configuration and status windows:
If you have difficulty starting the SBG900 Setup Program, see “ Troubleshooting ” for information.
Router is a configuration option that may appear on your window but may not be supported.
Click To Perform
Cable Configure and monitor the cable system connection.
Gateway Configure and monitor the gateway preferences (see Configuring the Gateway ).
Wireless Configure and monitor the wireless interface (see “ Setting Up the Wireless LAN ”).
Firewall Configure and monitor the firewall (see “ Setting the Firewall Policy ”).
Admin Changing the Default Password .
Info Display information about the SBG900 Setup Program.
Reboot Restart the SBG900. It is the same as pressing the reset button on the rear panel for less than five
seconds.
Log Out Log out of the SBG900.
For some settings, after you edit the field and click Apply, you are warned that you must reboot for your change
to take effect. Rebooting takes 10 to 15 seconds. After rebooting, you must log-in again.