Motorola SBG900 - Manual (Page 48)

42 SBG900 User Guide
Home
X
Exit Print
Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless USB
Gateway > LAN — dhcp server config Page
Only experienced network administrators should use this page to perform advanced DHCP server configuration:
CAUTION!
Do not modify these settings unless you are an experienced network administrator with strong
knowledge of IP addressing, subnetting, and DHCP.
Gateway > LAN — dhcp server config page fields
Field Description
LAN IP Address Enter the IP address of the SBG900 for your private LAN. The default is 192.168.0.1.
LAN IP Subnet Mask The subnet mask in dotted-decimal format. The default is 255.255.255.0.
Starting IP Address Enter the starting IP address to be assigned by the SBG900 DHCP server to clients in
dotted-decimal format. The default is 192.168.0.2.
# of DHCP Users Sets the number of clients for the SBG900 DHCP server to assign a private IP address. There
are 253 possible client addresses. The default is 253.
DHCP Server Lease Time Sets the time in seconds that the SBG900 DHCP server leases an IP address to a client. The
default is 3600 seconds (60 minutes).
Domain Name Sets the domain name for the SBG900 LAN. The default is None.
Time To Live Sets the TTL (hop limit) for outbound packets. The default is 64.
Interface Maximum
Transmission Unit Sets the SBG900 LAN MTU in bytes. The minimum is 68 bytes. The default is 1500 bytes.
Apply Click to apply your changes. You must reboot the SBG900.