Metra Electronics 99-8714 - Manual (Page 4)

99-8714 KIT ASSEMBLY
2
Slide the DIN cage into the radio
housing and secure by bending the
metal locking tabs outward. (Figure A) 1
Slide the aftermarket radio into the
cage until it snaps into place.
(Figure B) 2
Snap the pocket into the radio hous-
ing. (Figure C) 3
Continue to final assembly.
NOTE: Pocket may be installed in top
or bottom of radio housing.
A
B
C
Note: Refer also to the instructions included with the aftermarket radio.
DIN RADIO PROVISION WITH POCKET