Metra Electronics 99-8714 - Manual (Page 3)

99-8714 DASH DISASSEMBLY
SMART FORTWO 2008
A
B
C D
1
D isconnect the negative battery
terminal to prevent an accidental
short circuit.
1
Unclip the Hazard button switch panel.
(Figure A) 2
Remove (1) T-20 Torx head screw.
(Figure B) 3
Carefully unclip the panel surrounding
the radio, start at the top of the dash
and work your way down. (Figure C) 4
Remove (4) T-20 Torx head screws
from around the radio. (Figure D) 5
Disconnect the wire harness and
antenna and remove radio. 6
Continue to kit assembly.