Millennium Enterprises GME-P100 - Manual (Page 20)

2. Gently rub the lens to remove the wax.
It may take several applications to
remove all of the wax.
3. Once the lens becomes wet from the
solvent it is difficult to see where the
lens was rubbed and where it was not.
4. The number of repeat procedures will
depend on the amount of wax present.
5. After wiping the lens to remove the wax,
the facepiece should be cleaned with a
respirator cleaner such as MSA
Confidence Plus Germicidal Cleaner.
This will help to remove residual solvent
from the facepiece.
VM&P Naphtha and Stoddard Solvent
have a distinct solvent odor that could be
objectionable to respirator wearers.
Individuals cleaning the facepieces
should follow the use directions that
come with the solvents, work in a well-
ventilated area, and use proper personal
protective equipment. Failure to follow
this warning can result in serious person-
al injury or death.
If the respirator is not properly cleaned
after using VM&P Naphtha and Stoddard
Solvent the wearer may experience dis-
comfort.
TAL 403 (L) Rev. 4 - 430351 20
CLEANING AND DISINFECTING
WARNING
!
CAUTION
!