Millennium Enterprises GME-P100 - Manual (Page 15)

6. Conduct a successful Negative Pressure
Seal Test.
7. Attach each of the
arm straps to the front
of the hood shroud
using the Velcro
attachment pads.
Adjust the arm strap,
using the buckle
slides, so that the arm straps provide a
snug fit, but still allow for easy movement.
8. Tighten the drawstring
cord by securing the
bottom of the cord
and sliding the cord
tightener toward the
front of the neck. The
drawstring should
provide a snug comfortable fit. Ensure
drawstring is not twisted or knotted.
Do not over-tighten the drawstring. Over
tightening the drawstring can restrict
breathing. Failure to follow this warning
can cause serious injury or death.
9. Pull the shroud of the
hood uniformly over
the shoulders.
10. Repeat the Negative Pressure Seal Test
to ensure a sufficient face-to-facepiece
seal is achieved before exposure to a
hazardous agent.
15 TAL 403 (L) Rev. 4 - 430351
DONNING
WARNING
!