Memorex MT3010OM - Manual (Page 32)

31
SCREEN SETTINGS (CONTINUED)
Press the CHANNEL UP ❶ or DOWN ❷ button until SWAP
is selected. Turn this option ON or OFF using the VOLUME
UP ❸ or DOWN ❹ button. If set to ON, the PIP/POP
screens will swap.
7
3
1
2
4
Press the CHANNEL UP ❶ or DOWN ❷ button until
SCREEN MODE is selected. Press the VOLUME UP ❸ or
DOWN ❹ button to select one of the screen modes as
follows:
FULL: The image will stretch to cover the full screen; use
this MODE when viewing wide-screen programming
material.
M1: The image will increase slightly over the standard size.
M2: The image will increase slightly over M1.
M3: The image will increase slightly over M2.
M4: The image will increase slightly over M3.
4:3: The image will be the standard viewing size.
8
3
1
2
4
Press the MENU button once when finished to return to the
Main menu. Press the MENU button again to exit the Main
menu. If no button pressed for 15 seconds, the menu will
disappear automatically.
9
NOTE: For the PIP or POP function, one of the pictures must be in the HDTV-YPbPr or PC MODE and the other must be in
the TV, AV, S-VIDEO or COMPONENT mode, otherwise the PIP/POP function will not operate.