Memorex MT3010OM User Manual
Page 20
SETTING THE CHANNELS INTO MEMORY
19
This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channels set into
memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV’s memory. In
addition to normal VHF/UHF channels, this TV can receive up to 113 Cable TV channels.
Press the POWER button ❶ to turn on the TV; the POWER
indicator will light green. Press the MENU button ❷; the
MENU screen will appear
1
Press the CHANNEL UP ❶ or DOWN ❷ button until
CHANNEL SETTING is selected, then press the VOLUME
UP button ❸ to select it.
Press the CHANNEL UP ❶ or DOWN ❷ button until AUTO
SCAN is selected.
3
1
2
2
1
When AUTO MEMORY is selected, press the VOLUME UP
button to start the Auto Search. The TV will automatically
cycle through all the channels and store active channels
into memory. When completed, the TV will be on the first
available channel.
3
Press the
VOLUME UP ❶ or DOWN ❷ button to stop Auto
Memory while it is searching (if desired).
1
2
4
FAQs:
Why can’t I access TUNING?
You cannot access the TUNING option if you are not in the AIR/CABLE mode, there is no need to.
How many channels will I actually receive?
The actual number of channels that can be received depends on how many channels your cable or satellite company, or
local area provides. Contact your company to determine the number of channels in your area.
Do channels need to be set into memory before using the CHANNEL UP or DOWN button?
Yes, the channels must be programmed into memory.
2