Motorola MDV560VR - Manual (Page 25)

English
Operation 25
VHS Hi-Fi Stereo System / MTS
Broadcast
The DVD+VCR is equipped with the VHS Hi-Fi audio sound
system for recording and playback. The information below
gives a brief description of Hi-Fi audio and how to record
and play a tape in the Hi-Fi audio mode.
Playback with Hi-Fi Stereo Audio Sound
A stereo TV with AUDIO/VIDEO input jacks or a stereo
audio system is required for correct stereo playback. To
experience the full and rich stereo sound available with Hi-Fi
recorded tapes, we recommend the connection of this unit
to a home stereo audio system.
11
Set the AUDIO MODE option to HI-FI on the
SETUP menu .
22
Set the AUDIO OUTPUT option to STEREO
position.
(STEREO) POSITION: The left channel sound (L) is heard
from the left speaker and the right channel sound (R) is heard
from the right speaker.
(LEFT) POSITION: The left channel sound (L) is heard from
both speakers.
(RIGHT) POSITION: The right channel sound (R) is heard
from both speakers.
33
Press SYSTEM MENU.
44
Insert a cassette and press PLAY ( N ).
Adjust volume at your stereo system.
MTS (Multi-Channel TV Sound)
This DVD+VCR will decode MTS stereo and bilingual (SAP)
off-the-air broadcast sound signals. It also decodes stereo TV
sound from local cable companies, as long as they operate on
assigned cable frequencies and use the EIA-recommended MTS
stereo/bilingual TV sound system.
Multichannel TV Sound Indicator (MTS)
Shows on-screen as shown below when OK is pressed.
" One or both of the indicators will light, depending on the MTS
broadcast.
If only STEREO appears on the TV screen.
The DVD+VCR can record in stereo onto the VHS Hi-Fi audio
tracks (when the BROADCAST TYPE option is in the STEREO posi-
tion). The DVD+VCR will also record mono audio onto the mono
audio track.
If only SAP appears on the TV screen.
Set the BROADCAST TYPE option to SAP.
If STEREO/SAP appears on the TV screen
Use the BROADCAST TYPE option to select the desired recording
mode (STEREO or SAP).
SAP (Second Audio Program) Recording
Some stations transmit a Second Audio Program, which is
used for a second language or additional information. When
the station broadcasts a Second Audio Program, follow the
procedure below to record the SAP.
11
Insert a video cassette with the safety tab intact.
22
Set the BROADCAST TYPE option to SAP on
the SETUP menu.
Do this only if the SAP appears on the TV screen or you know
the program will use the SAP.
33
Press SYSTEM MENU.
44
Set the desired recording speed (SP or SLP) by
pressing SPEED.
55
Select the desired channel. SAP should appear
on the TV screen.
66
Press REC/ITR (z z) once
You are now recording the program you see and hear on the TV.
77
Press STOP (x x) to stop recording.
STEREO
Lights when a stereo broadcast is
received.
SAP
Lights when a SAP BILINGUAL broad-
cast is received.
TV screen
CH 4
STEREO/SAP