MicroNet Technology SP1659P - Manual (Page 99)

: 1 to 26
:symmetric or asymmetric
Example:
SP1659P(port)# set flow-control 3-6 symmetric
set speed-duplex
Syntax: set speed-duplex |[<10 | 100 | 1000> ]
Description: To set up the speed and duplex of all ports.
Argument:
:syntax 1,5-7, available from 1 to 26
auto: set auto-negotiation mode
10: set speed to 10M
100: set speed to 100M
1000: set speed to 1000M
half: set to half duplex
full: set to full duplex
Possible value:
: 1 to 26
: auto, 10, 100, 1000
: full, half
Example:
SP1659P(port)# set speed-duplex 8 100 full
show conf
Syntax: show conf
Description: To display the each port’s configuration about state, speed-duplex and flow control.
Argument: None
Possible value: None
Example:
SP1659P (port)# show conf
show detail-counter
Syntax: show detail-counter
Description: To display the detailed counting number of each port’s traffic.
Argument: : port, syntax 1,5-7, available from 1 to 24
Possible value: : 1 ~ 24
Example:
SP1659P (port)# show detail-counter 5
show media
Syntax: show sfp
Description: To display the module 25 or 26 information.
Argument: : available 25, 26
Possible value: : 25, 26
Example:
SP1659P (port)# show media 26
Port 26 Fiber Media Information
-------------------------------------------------
Connector Type : SFP - LC
Fiber Type : Single Mode (SM)
98