MicroNet Technology SP1659P - Manual (Page 109)

disable
Syntax: disable
Description: To disable the STP function.
Argument: None
Possible value: None
Example:
SP1659P(stp)# disable
enable
Syntax: enable
Description: To enable the STP function.
Argument: None
Possible value: None
Example:
SP1659P(stp)# enable
set config
Syntax: set config
Description: To set up the parameters of STP.
Argument:
: priority must be a multiple of 4096, available from 0 to 61440.
: available from 1 to 10.
: available from 6 to 40.
: available from 4 to 30.
Note: 2*(Forward Delay -1) >= Max Age, Max Age >= 2*(Hello Time +1)
Possible value:
: 0 to 61440
: 1 to 10
: 6 to 40
: 4 to 30
Example:
SP1659P(stp)# set config 61440 2 20 15
set port
Syntax: set port
Description: To set up the port information of STP.
Argument:
: syntax 1,5-7, available from 1 to 26
: 0, 1-200000000. The value zero means auto status
: priority must be a multiple of 16, available from 0 to 240
: Admin Edge Port,
: Admin point to point,
Possible value:
:1 to 26
: 0, 1-200000000
: 0 to 240
: yes / no
: auto / true / false
108