MicroNet Technology SP1659P - Manual (Page 22)

Parameter description:
y Rx Packets: The counting number of the packet received.
y Rx Octets: Total received bytes.
y Rx Errors: Number of bad packets received.
y Rx Unicast Packets: Show the counting number of the received unicast packet.
y Rx Broadcast Packets: Show the counting number of the received broadcast packet.
y Rx Multicast Packets: Show the counting number of the received multicast packet.
y Rx Pause Packets: Show the counting number of the received pause packet.
y Tx Collisions: Number of collisions transmitting frames experienced.
y Tx Single Collision: Number of frames transmitted that experienced exactly one collision.
y Tx Multiple Collision: Number of frames transmitted that experienced more than one collision.
y Tx Drop Packets: Number of frames dropped due to excessive collision, late collision, or frame aging.
y Tx Deferred Transmit: Number of frames delayed to transmission due to the medium is busy.
y Tx Late Collision: Number of times that a collision is detected later than 512 bit-times into the
transmission of a frame.
y Tx Excessive Collision: Number of frames that are not transmitted because the frame experienced
16 transmission attempts.
y Packets 64 Octets: Number of 64-byte frames in good and bad packets received.
y Packets 65-127 Octets: Number of 65 ~ 127-byte frames in good and bad packets received.
y Packets 128-255 Octets: Number of 128 ~ 255-byte frames in good and bad packets received.
y Packets 256-511 Octets: Number of 256 ~ 511-byte frames in good and bad packets received.
y Packets 512-1023 Octets: Number of 512 ~ 1023-byte frames in good and bad packets received.
y Packets 1024- 1522 Octets: Number of 1024-1522-byte frames in good and bad packets received.
y Tx Packets: The counting number of the packet transmitted.
y TX Octets: Total transmitted bytes.
y Tx Unicast Packets: Show the counting number of the transmitted unicast packet.
y Tx Broadcast Packets:
y Show the counting number of the transmitted broadcast packet.
y Tx Multicast Packets: Show the counting number of the transmitted multicast packet.
y Tx Pause Packets: Show the counting number of the transmitted pause packet.
y Rx FCS Errors: Number of bad FSC packets received.
y Rx Alignment Errors: Number of Alignment errors packets received.
y Rx Fragments: Number of short frames (< 64 bytes) with invalid CRC.
y Rx Jabbers: Number of long frames(according tomax_length register) with invalid CRC.
y Rx Drop Packets: Frames dropped due to the lack of receiving buffer.
y Rx Undersize Packets: Number of short frames (<64 Bytes) with valid CRC.
y Rx Oversize Packets: Number of long frames(according to max_length register) with valid CRC.
y
3.5 PoE
3.5.1 PoE Status
Display the information about the PoE status.
21