Multi-Tech Systems ROUTEFINDER RF802EW - Manual (Page 17)

Software Installation
17
Server are the same server, so the IP address will be the same.
Click Next.
2. IP Routing (NAT Enabled) and
3. IP Routing (NAT Disabled)
If you select IP Routing for the asynchronous port, the Setup Wizard: IP Routing dialog box
displays.
Enter the information required to dial-up and login to your ISP’s remote server:
• Telephone Number: Enter the phone number used to dial your remote server (ISP).
Note: If you must dial a number to get an outside line (for example, “9”, or “0”), enter the
required number plus a “w”(wait) or a comma in the Telephone box (for example, 9w555-2323
or 9,,5552323). Each comma provides a 3-4 second delay.
• User Name: Enter the User Name for your remote server or ISP account.