beautypg.com

Multi-Tech Systems ROUTEFINDER RF802EW User Manual

Page 11

background image

Software Installation

11

7. The Wireless Function dialog box displays.

Select the function for the wireless port function by selecting Enable Wireless Access Point
function only, or Enable Wireless Access Point + Router function. If you are using NAT
Enabled, you may also select Enable PPPoE.

Select

Enable Wireless Access Point function only to set AP’s IP manually or acquire an

IP address from a DCHP server.

Click Next.

8. The Wireless Settings dialog box displays.

See also other documents in the category Multi-Tech Systems Hardware: