Metz MF 72TL68 - Manual (Page 50)

50
27. Operation without the
remote control unit
The following procedures are intended only for
cases where the batteries of the remote control
unit are exhausted or the remote control unit is not
available.
The TV controls are located at the front of the set
underneath a cover which can be opend with the
fingernails.
Switching on
Press the main switch on the TV set to switch to
standby mode. To switch the set on with program-
me position 1 selected, press and hold the key F
until the green LED lights up.
You can also execute the following functions with
the controls on the front of the TV set. The prese-
lected function remains active for 10 seconds.
Changing programme positions:
Press the -/+ keys.
Volume:
Press the preselection key F until the bar display
for volume appears on the screen. Then press the
-
or + key to adjust the volume.
Contrast:
Press the preselection key F until the bar display
for contrast appears on the screen. Then press the
-
or + key to adjust the contrast.
P - + P – + F
604 47 2017.A1 23.09.2004 14:45 Uhr Seite 50