Metz MF 72TL68 - Manual (Page 32)

32
19. EPG - NexTView
NexTView is an Electronic Program Guide (EPG)
for all important programme providers. This EPG
is transmitted by various stations and also con-
tains the programme data for the other stations.
The TV set needs about 30 minutes to collect the
large amount of data for the first time.
• On TV sets with two tuners (standard configura-
tion) the data are collected by the second tuner
(see the next page) during normal operation of
the TV set. When the data have been collected,
the TV set stores the EPG in a special memory.
The EPG is updated regularly in this memory as
long as the TV set is not switched off with the
main switch.
• On TV sets with only one tuner (e.g. if your set
has been converted and has only one satellite
tuner):
- the set must be left tuned to the NeexTView pro-
gramme position for at least 30 minutes, or
- the data are collected during the night (between
02:30 - 03:00) while the set is in standby mode.
Not possible with an external satellite receiver!
604 47 2017.A1 23.09.2004 14:45 Uhr Seite 32