Metz MF 72TL68 - Manual (Page 8)

8
4. Daily operation
Switching on
Switch on the TV set with the main
switch. The red standby indicator lights.
Then enter the desired programme posi-
tion on the numeric keys of the remote
control unit.
If you have defined an initial program-
me position (see page 46), pressing the
key with the TV set in standby mode
will select this programme position.
Switching off
Press the key to switch the TV set to
standby mode or press the main switch
on the TV set to switch it off completely.
Adjusting the volume
You can adjust the volume with the - +
key.
Adjusting picture and sound set-
tings
Call the picture settings with the blue key
or the sound settings with the yellow
key .
At the bottom left of the screen, you will
then see the setting box with the various
functions. Select the desired function
with the rocker key „P+/P-“ and adjust
the setting with the - + key.
5. Setting the operating mode
TV AV R
The TV set can be switched on at the desired ope-
rating level with the keys "TV", "AV" and "R".
These keys can also be used to switch between the
operating levels.
When the TV set is switched on with one of these
keys, the station which was last selected at this
operating level is again set.
TV = television mode
AV = audio-visual mode for use with AV devices
R = radio mode
1)
( 1) available only if a SAT receiver is installed)
604 47 2017.A1 23.09.2004 14:45 Uhr Seite 8