Metz MF 72TL68 - Manual (Page 47)

47
You can define a so-called initial programme
position in this TV set. This is intended primarily to
enable you to switch to the AV programme posi-
tion when you are using an external SAT receiver.
Setting the initial programme position
In a menu with two asterisks (**), the set-
tings for this menu item cannot be chan-
ged.
In the menu „AV devices“ (see also section
24, „AV devices“), select and connect a SAT recei-
ver (SAT/SetTop).
• Press the „AV“ key.
• In the „AV playback menu“, use the
numeric keys to select the position
„SAT/SetTop“.
• Press the „MENU“ key to open the TV
menu.
• Press the red key to open the menu
„Configuration“.
• Use the cursor control key to select
„Operation“ and then „Initial programme posi-
tion“.
• Press the „OK“ key and then, in the setting win-
dow, use the - + key to select „Yes“.
• Press the „OK“ key to save the new setting.
After this, the AV programme position will
be selected automatically if you switch your
TV set on with the main switch and then
press the key on the remote control unit.
☞
☞
25. Initial programme position Call the menu
OK
OK
MENU
* The number of subjects and sections
displayed here depends on the opera-
ting scope setting in the menu.
Operation
EURO sockets*
Station search
Country*
Language*
Switch on with this station? Yes
Picture-Volume
AV devices
Station table
Timer
Scope of operation
EPG settings
Automatic zoom
2) *
Sound setting
Init. prog. position*
TV
-Menü
Configuration
: select,
OK: go to
settings.
‚ ‚ ‚
2) Available only on TV sets
which are equipped with this
option.
604 47 2017.A1 23.09.2004 14:45 Uhr Seite 47