Metz MF 72TL68 - Manual (Page 48)

48
The operating scope of the TV set can be set to
three different levels in order to make it easier to
find the functions you need in the many possible
menus.
The operating scope of the TV set is indicated by
one, two or three asterisks (*).
1 Ȣ The motto here is "just watching TV". It is not
possible to open the TV menu. Only the func-
tions provided on the remote control can be
used, namely:
- Zapping
- Programme selection with the numeric keys, with
the P+/P- rocker switch or with the white key .
- Opening Teletext.
- Displaying information with the INFO key.
- Playing back films from a VCR or DVD player by
pressing the AV key.
- Pressing the F1 key and selecting functions from
the "Special functions 1".
- Pressing the F3 key and selecting functions from
the "Special functions 3".
- Pressing the blue key and selecting the stan-
dard picture functions.
- Pressing the yellow key .and selecting the
standard sound functions
- Pressing the F3 key to open the EPG function
If your TV set is currently set to operating scope 1
(*) and you want to use one of the extended
menus, you can change the scope as follows:
• Press and hold the MENU key for at least five
seconds to open the TV menu.
• The menu item "Operation" is pre-selected auto-
matically.
• Use the - + key to select the desired operating sco-
pe and press the OK key to save the new setting.
26. Setting the operating scope
604 47 2017.A1 23.09.2004 14:45 Uhr Seite 48