Multi-Tech Systems MT5634ZPW-PCI User Manual
Page 46
MT5634ZPW-PCI
46
Owner’s Manual
Command:
\N
n
Error Correction Mode Selection
Values:
n = 0–5, or 7
Default:
3
Description:
\N0
Non-error correction mode with data buffering (same
as
&Q6).
\N1
Direct mode.
\N2
MNP reliable mode.
\N3
V.42/MNP auto-reliable mode.
\N4
V.42 reliable mode.
\N5
V.42, MNP, or non-error correction (same as
\N3).
\N7
V.42, MNP, or non-error correction (same as
\N3).
Command:
\Q
n
Local Flow Control Selection
Values:
n = 0, 1, or 3
Default:
3
Description:
\Q0
Disable flow control (same as
&K0).
\Q1
XON/XOFF software flow control (same as
&K4).
\Q2
CTS-only flow control. Not supported—responds
ERROR.
\Q3
RTS/CTS hardware flow control (same as
&K3).
Command:
\T
n
Inactivity Timer
Values:
n = 0–255
Default:
n/a
Description:
\Tn
Inactivity timer setting contingent on either \T value or
S-Register S30 value (e.g., AT\T45&W0
configures in parallel ATS30=45&W0
versa.
Command:
\V
n
Protocol Result Code
Values:
n = 0 or 1
Default:
1
Description:
\V0
Disable protocol result code appended to DCE speed.
\V1
Enable protocol result code appended to DCE speed.
Command:
\X
n
XON/XOFF Pass-Through
Values:
n = 0 or 1
Defaults:
0
Description:
\X0
Respond to and discard XON/XOFF characters.
\X1
Not supported—responds ERROR.