Multi-Tech Systems MT5634ZPW-PCI - Manual (Page 30)

MT5634ZPW-PCI 30
Owner’s Manual
Loopback Testing
1. Connect a microphone and speaker to the MultiModemZPW-
PCI. To avoid feedback, make sure the microphone and
speaker are well separated; for best results, use a headphone
instead of a speaker (make sure volume is turned down).
2. Select Start , Programs , Accessories , HyperTerminal .
3. Double-click on the Multi-Tech BBS icon you created in
“Step 2: Call the Multi-Tech BBS.” HyperTerminal starts with
the Connect dialog box open.
4. Click Cancel in the Connect dialog box.
5. In the HyperTerminal terminal window, type AT&&S and
press ENTER. This command causes input from the
microphone to be looped back to the speaker.
6. Speak into the microphone; you should hear your voice on
the speaker or headphone.
7. Type ATZ and press ENTER to reset the modem.
MultiModemZPW-PCI’s Speakerphone Test
1. Connect a microphone and speaker to the MultiModemZPW-
PCI.
2. Select Start, Programs, Accessories, HyperTerminal.
3. Double-click on the Multi-Tech BBS icon you created in
“Step 2: Call the Multi-Tech BBS.” HyperTerminal starts with
the Connect dialog box open.
4. Click Cancel in the Connect dialog box.
5. In the HyperTerminal terminal window, type
AT+FCLASS=8
AT+VLS=7
ATDT
xxxxxxx (dials the phone number xxxxxxx )