Philips Magnavox 32MF338B - Manual (Page 19)

19
EN
WATCHING TV
INTRODUCTION
PREPARATION
INITIAL SETTING
OPTIONAL SETTING
TROUBLESHOOTING
INFORMATION
Screen Information
You can display the currently selected channel or other information such as
the audio mode on the TV screen.
TV
In the analog mode, the current channel number and the audio mode are
displayed.
Press [INFO].
6
SAP / STEREO
TV-PG DLSV
480i 480i 4:3 4:3 SD SD
CC CC
The current channel number, audio mode, type of
resolutions for video signal, TV aspect ratio, CC and
TV program rating are displayed on the top-right
corner of the TV screen.
To clear the display, press [INFO] again. You can also
press [BACK
].
5
•
DTV
In the digital mode, the detailed broadcasting information for the current
channel such as program title, program guides are displayed.
Press [INFO] to display the details of the currently
selected program.
Broadcasting Information
The following information is displayed.
1 program
title
2 broadcast station
3 program guide
(The program guide added to broadcasting
information is displayed. Maximum display of 4
lines.)
4 channel number
5 audio language
(Refer to “Switching Audio Mode” on page 18.)
6 effective scanning lines and scan mode
7 program
format
8 program aspect ratio
9 program
rating
10 CC (not available if CC is set to “Off”)
TV: TV-14
Grad B: B4 Grad C: C2
NG Toggle A: H1
40-1
English 1/2
Rating
480i 480i 4:3 4:3
CC CC
SD SD
KABC KABC A Day of Memories A Day of Memories
A quarter-century ago, which may now qualify as the good old days of
newspapering, run-of-paper sales accounted for 80 percent of the
industry's advertising revenues. Department stores and supermarket
were selling a stock on the same day it was purchased. When the new
1 2
9
4
5
10
6, 7, 8
3
Note:
• When the program guide consists of more than 4 lines, use
[Cursor K/ L] to scroll.
• “No description provided.” is displayed when the program
guide is not provided.
• While the program guide is displayed, the closed caption
function is interrupted.
• In external input mode, the following screen is displayed;
e.g.) When an external device is connected to VIDEO1 input
jack.
Video1
TV-PG DLSV
480i 480i SD SD
CC CC
• The information display will automatically disappear in
1 minute.
• “This program exceeds your rating limit. To unlock the
program, enter your PIN.” is displayed when you access to
the programs which exceed the rating level you set.
To watch the programs, enter your Pin number by using
[the Number buttons].
The following operations set the rating level again.
- Turn off the unit.
- Follow the steps 1-4 in “Parental Control” on page 29 and
enter your Pin number.
•