MITSUBISHI ELECTRIC WL639U - Manual (Page 28)

EN-8
Adjusting projected images
To adjust the brightness (CONTRAST and BRIGHTNESS):
You can make adjustments for the brightness of the projected image using the menu.
(See page 3 for menu setting.)
1. Display the IMAGE menu.
. Select CONTRAST or BRIGHTNESS by pressing the  or  button.
3. Adjust the selected item by pressing the  or  button.
To cancel the menu:
4. Press the MENU button.
CONTRAST
Select to adjust the contrast of the image. Every time the  button is pressed, the image becomes brighter and more
defined. Every time the  button is pressed, the image becomes darker and less defined.
BRIGHTNESS
Every time the  button is pressed, the image becomes brighter. Every time the  button is pressed, the image
becomes darker.
To adjust the color (COLOR and TINT):
You can adjust the color of the projected image using the menu.
(See page 3 for menu setting.)
1. Display the IMAGE menu.
. Select COLOR or TINT by pressing the  or  button.
• COLOR or TINT is unavailable when COMPUTER1, COMPUTER or DVI is selected as the input source.
• TINT is available only when the NTSC signal is input.
3. Adjust the selected item by pressing the  or  button.
To cancel the menu:
4. Press the MENU button.
COLOR
Use to adjust the color thickness of the projected image. Every time the  button is pressed, the color becomes
thicker. Every time the  button is pressed, the color becomes lighter.
TINT
Use to adjust the tint of the projected image. Every time the  button is pressed, the image appears more greenish.
Every time the  button is pressed, the image appears more reddish.
To sharpen or soften the projected image (SHARPNESS):
You can adjust the sharpness of the projected image using the menu.
(See page 3 for menu setting.)
1. Display the IMAGE menu.
. Select SHARPNESS by pressing the  or  button.
3. Adjust the selected item by pressing the  or  button.
To cancel the menu:
4. Press the MENU button.