MITSUBISHI ELECTRIC WL639U - Manual (Page 25)

EN-5
3. FEATURE menu
FEATURE
AUTO
AUTO
opt.
MENU POSITION
VIDEO SIGNAL
?
ASPECT
RESET ALL
English LANGUAGE A Ë
OK
SCART INPUT
DISPLAY
INPUT
PASSWORD
FUNCTION
CINEMA MODE AUTO
1.
SETUP AUTO
OFF
ITEM SETTING FUNCTION
ASPECT AUTO Select to change the aspect ratio automatically depending on the input
signal. (Select this option for normal use.)
16:9 This option allows you to select the display position of squeezed (or
horizontally compressed) images stored on DVD discs. By pressing the
ENTER button, you can select the display position among CENTER,
UPPER, and LOWER.
REAL Select to project images in their original size as input.
FULL Select to project images in full size (180 x 800 pixels) irrespective
of type of input signal.
PASSWORD FUNCTION Use to enable or cancel the password lock. See page 33 for details.
MENU POSITION options Use to change the position of the menu.
CINEMA MODE AUTO The film mode will be automatically activated when a film source signal is
input.
OFF The film mode will not be activated.
VIDEO SIGNAL 8 options When AUTO is selected, the appropriate video format is automatically
selected depending on the input signal. If the image isn’t displayed
correctly, select the desired video format manually.
SETUP AUTO Select to change the SETUP mode automatically.
OFF Select to make black lighter.
3.75% / 7.5% Select to make black thicker.
• When 7.5% is chosen, the brightness is decreased by the set-up can-
cel function for the U.S. Choose OFF when the image is dark.
SCART INPUT ON / OFF Choose ON when connecting the projector with a device equipped with
the SCART terminal that can output RGB signal. SCART terminal is used
mainly in Europe. Choose OFF normally. (Available only for the input signal
from the COMPUTER/COMPONENT VIDEO IN-1 terminal.)
LANGUAGE 10 languages Use to select the language used in the menus.
RESET ALL OK Use to reset the settings of the menu (excluding IMAGE CAPTURE,
PASSWORD FUNCTION and LANGUAGE) to the factory setting values.
• CINEMA MODE can be adjusted only when a TV60, TV50, 480i or 576i signal is being displayed.
• When SCART INPUT is set to ON, nothing is output to the external monitor.
• When SCART INPUT is set to ON, normal computer signals aren’t projected.
• Use a SCART-BNC (or SCART-Mini D-SUB 15-pin) cable (option) when connecting this projector with an AV device equipped
with the SCART terminal.
• Some AV devices equipped with the SCART terminal aren’t compatible with this projector.
Menu operation (continued)