Motorola SM56 - Manual (Page 9)

to do this; refer to the next section.
•
How Do I Add AT Commands Before the Modem Dials My ISP?
1. Open the Control Panel.
2. Double-click the Modems icon.
3. Click on once to select the Motorola SM56...Modem.
4. Click on Properties.
5. Select Connection.
6. Click on Advanced.
7. In the Extra Settings box, chain AT commands as needed. You do not need to enter the AT
prefix, but it will not hurt if you do.
8 Un-installing and Upgrading
Modem Un-Install Procedure on Windows 98 and Millennium
1. Open the Windows Control Panel
2. Double click the Add/Remove Programs icon.
3. Select Motorola SM56 Modem Un-install and click Add/Remove.
4. Shut down the computer and remove the modem board from the computer.
Modem Un-Install Procedure on Windows 2000 and Windows XP
1. Open the Windows Control Panel
2. Double click the System Icon.
3. Select the hardware tab and Select the Device Manager button.
4. Double Click the Modems item.
5. Right Click on the Motorola SM56 Modem device and select uninstall from the popup menu.
6. Shut down the computer and remove the modem board from the computer.
Modem Upgrade Procedure on Windows 98 and Millennium
1. Obtain the latest driver set from your direct modem supplier.
2. Run the upgrade utility -- sm56set.exe, and follow the prompts
Modem Upgrade Procedure on Windows 2000 and Windows XP
1. Obtain the latest driver set from your direct modem supplier.
2. Open the Windows Control Panel
3. Double click the System Icon.
4. Select the Hardware tab and Select the Device Manager button.
5. Double Click the Modems item.
6. Right Click on the Motorola SM56 Modem device and select Properties from the popup
menu.
7. Select the Driver tab and press Update Driver button.