Minuteman UPS PARA SYSTEMS SNMP-NV6 - Manual (Page 29)

SNMP-NV6
Page 29
5.5 Notification
5.5.1 Event Level
Each individual event can be configured for Information, Warning or Alarm. You can change
the event for e-mail or SNMP trap by modifying the event level.
5.5.2 SNMP Access
The SNMP-NV6 card supports the SNMP protocol. You can use an NMS to manage a UPS
through a network. You must enter the IP address of the workstation in the SNMP Access
Table to prevent any unauthorized users from configuring the SNMP-NV6 card via SNMP
protocol. The maximum number of IPs is 256.