Minuteman UPS PARA SYSTEMS SNMP-NV6 - Manual (Page 20)

SNMP-NV6
Page 20
5.3.2 Control
This menu allows you to send the control commands to the UPS.
5.3.2.1 Battery Test
Sends the command to the UPS to perform a battery test.
5.3.2.2 Shutdown & Restart UPS Only
Sends the command to the UPS to perform the Shutdown and/or Restart function.
If you only want to shutdown the UPS mark the UPS Shutdown Delay check box and fill
in the delay time.
If you only want to restart the UPS mark the UPS Restart Delay check box and fill in the
delay time.
If you want to perform both the shutdown and the restart mark both of the check boxes
and fill in both of the delay times.
5.3.2.3 Smart Shutdown
The Smart Shutdown feature is used to shutdown all of the connected computers and the
UPS safely.
First you should estimate the longest OS shutdown time of your operating systems,
which have the shutdown software installed and are connected to this card. The card will
delay the assigned OS shutdown time until all of the operating systems are shutdown by
the shutdown software then send the UPS shutdown command to the UPS.