Minuteman UPS PARA SYSTEMS SNMP-NV6 - Manual (Page 14)

SNMP-NV6
Page 14
4.4.1.4 Time Server
There are two ways to set the SNMP-NV6 card’s current time and date. One is to set the
system time manually, but this is not the best way. The ideal way is to set up a timeserver.
The SNMP-NV6 card does support SNTP, which is supported by Windows XP.
To configure a Windows PC to act as a timeserver, please install the Simple TCP/IP
Services from the Add/Remove Windows Components.
+========================+
| Time Server |
+========================+
[1]. Time Selection: SNTP
[2]. Time Zone: +0 hr
[3]. 1st Time Server: POOL.NTP.ORG
[4]. 2nd Time Server:
[5]. Manual Date: 01/01/2000 (MM/DD/YYYY)
[6]. Manual Time: 00:00:00 (hh:mm:ss)
[0]. Back To Previous Menu
Please Enter Your Choice =>
Item Function Description Default
[1]. Time Selection Select SNTP or manually SNTP
[2]. Time Zone Select time zone +0 hr
[3]. 1 st Time Server The first time server for SNTP POOL.NTP.ORG
[4]. 2 nd Time Server The second time server for SNTP
[5]. Manual Date
Assign the date manually if the Time
Selection is selected to Manual
01/01/2000
[6]. Manual Time
Assign the time manually if the Time
Selection is selected to Manual
00:00:00
4.4.1.5 Soft Restart
Simply restart the SNMP-NV6 card. It does not affect the UPS.
4.4.1.6 Reset All To Default
Resets all of the settings back to the original default values.
4.4.1.7 Exit Without Save
Exit and disregard any changes.
4.4.1.8 Save And Exit
Saves the changes and exits.