Micronics PENTIUM PRO W6-LI - Manual (Page 50)

W6-LI System Board Manual
Chapter 4: The BIOS Setup Utility
48
Boot Screen
The Boot screen allows you to configure the power up
system configuration settings.
Figure 4-8: Boot Screen
Hard Drive Boot Order
This selection will read the diskette drive (default) and
the hard drive in sequence on boot.
Setup Prompt
If this selection is enabled, the message "Press F2 to enter
Setup" is displayed on boot. The default setting is Enabled.
POST Errors
If this selection is enabled (default) and an error occurs on
boot, the BIOS will display a SETUP entry or resume
prompt. If this selection is disabled, the system will always
attempt to boot.