Micronics PENTIUM PRO W6-LI - Manual (Page 43)

W6-LI System Board Manual
Chapter 4: The BIOS Setup Utility
41
Parallel Port
The parallel port may be configured using the following
options: Disabled (No configuration), Enabled (User con-
figuration), Auto (BIOS configuration) and PnP
O/S (O/S configuration).
Floppy Disk Controller
The selection allows you to enable or disable the floppy disk
controller.
Integrated PCI IDE
Enables or disables the integrated Local Bus IDE adapter.
The IDE controller may be set for Primary, Both (default)
or Disabled.
Integrated SCSI
Enable or disable the integrated PCI SCSI interface. The
default setting is Enabled.
Integrated Sound
Enables or disables the integrated sound interface. The
default setting is Enabled.
Use MP Specification
This selection allows you to select the 1.1 (default) or 1.4
multiprocessor specification.
Plug & Play O/S
This selection, when set to Yes, allows the system to work
with a Plug and Play operating system such as Windows 95.
The default setting is No.