Micronics PENTIUM PRO W6-LI - Manual (Page 38)

W6-LI System Board Manual
Chapter 4: The BIOS Setup Utility
36
System Time and Date
To set the time, use the <-> key to decrease the number
and the <+> key to increase the number. To move the
prompt forward, use the key; to move the
prompt backward, use the key. To set the
date, use the up and down arrows<
↑
/
↓
> to highlight the
System Date and follow the same procedure used to set
the time.
Diskette A or B
To configure a floppy drive added to or removed from
your computer, use the up and down arrow keys <
↑
/
↓
>
to select the desired drive. Use the <+/-> keys to
change the setting until it matches the floppy drive you
installed. The BIOS supports 2.88MB, 1.44MB, 1.2MB,
720KB, and 360KB floppy drives.
Numlock
Setting this to ON activates Numlock upon boot. Setting
this to Auto (default) activates Numlock if the BIOS
detects a numeric keyboard. It may also be set to OFF.
External Cache
This selection allows you to enable the external memory
cache. For optimal performance, select Enabled.
Video BIOS
The Video BIOS category allows you to Shadow or Shadow
& Cache the video BIOS. Choosing Shadowed & Cached
(default) caches the shadowed video BIOS for even higher
performance. Choosing Shadowed copies the video BIOS
into RAM for faster execution. To disable the Video BIOS
category, select Disabled.