4-13-2. tftp backup configuration, 4-14. reset system, 4-15. reboot – Milan Technology MIL-SM801P User Manual
Page 80: 4-14. reset system 5-4-15. reboot
76
5-4-13-2. TFTP Backup Configuration
Use this screen to set the TFTP server IP address. You can save current
EEPROM value from here, then go to the TFTP Restore Configuration
screen to restore the EEPROM value.
5-4-14. Reset System
Reset switch to default configuration. The default value is shown below:
5-4-15. Reboot
Reboot the switch in software reset.
This manual is related to the following products: