Milan Technology MIL-SM801P - Manual (Page 6)

2
Features
„ Conforms to IEEE 802.3, 802.3u, and 802.3x Ethernet
Standards
„ Eight auto-sensing 10/100Mbps Ethernet RJ-45 ports
„ Automatic MDI/MDIX crossover for each 10BASE-T/
100BASE-TX port
„ One Fixed 100Mbps Fiber port SC/SC single-mode, MT-RJ,
VF-45 connector for MIL-SM801P series only
„ One Fixed 1000Mbps Gigabit Ethernet port for MIL-SM801G
series only
„ One Console port on the rear for switch software configuration
„ Half-duplex mode for back pressure and flow control for full-
duplex
„ Store-and-forward switching architecture
„ Automatic address learning
„ Static MAC table for a secured network
„ 8K-entry MAC address table
„ 2Mbit memory buffer sharing
„ Non-blocking full wire speed performance
„ LED-indicators for Power, 100M, LK/ACT, FD/COL
„ 10-inch design for desktop or rackmount
Intelligent Management Features
„ Web-based management
„ SNMP network management
„ Console and Telnet management
„ IEEE 802.1Q VLAN Tag, up to 4094 VLAN groups
„ IEEE 802.1ad Port Trunking and IEEE 802.3 ad LACP
supported
„ IEEE 802.1d Spanning Tree
„ MIB II ( RFC1213 ) supported
„ IP Multi-cast, IGMP Snooping
„ Quality of Service (QoS)
„ Port Mirroring
„ Broadcast Filtering
„ Static MAC Address support
„ Port Security
„ GVRP