Milan Technology MIL-SM801P - Manual (Page 55)

51
5-2. Port Status
1. Port status
State: Displays port status as off or on depending on user setting. “Unlink”
means the port is offline or “off ”.
Link Status: Down is “No Link”, Up is “Link”.
Auto Negotiation: Indicates if the port is in auto negotiation mode.
Speed status: Displays 100Mbps or 10Mbps speed. Ports 1 - 8 are
10/100Mbps. Port 9 may be 100Mbps or 1000Mbps.
Duplex status: Displays full-duplex or half-duplex mode.
Flow control: Displays flow control status as enabled or disabled.
Config: Displays the state of user settings.
Actual: Displays the negotiation status.