Metra Electronics 99-7334 - Manual (Page 6)

99-7334 KIT ASSEMBLY
4
A
B
C
DOUBLE DIN/STACKED ISO MOUNT UNITS PROVISION
Cut and remove the center bar from
the radio housing. (Figure A) 1
Snap the Double DIN brackets to the
inside edge of the Radio Housing.
(Figure B) 2
Snap the Double DIN Trim plate onto
the front of the Radio Housing.
(Figure C) 4
Slide the Double DIN or stacked ISO
mount unit(s) into the bracket/radio
housing assembly and secure the
unit(s) to the assembly using the
screws supplied with the unit(s).
(Figure C) 3
Continue to final assembly.
* Note: Refer also to the instructions included with the aftermarket radio.