Metra Electronics 99-7334 - Manual (Page 5)

99-7334 KIT ASSEMBLY
3
A
B
C D
ISO MOUNT RADIO PROVISION
Mount the ISO Brackets to the radio
using the screws supplied with the
radio. (Figure A) 1
Slide the radio/bracket assembly into
the radio housing until it snaps into
place. (Figure B) 2
Snap the ISO Trim plate onto the front
of the Radio Housing. (Figure C) 3
Snap the pocket into the bottom
opening of the radio housing.
(Figure D) 4
Continue to final assembly.
* Note: Refer also to the instructions included with the aftermarket radio.