MSI G52-S9617X1 - Manual (Page 58)

3-18
MS-9617 ATX Workstation Board
ECP Mode Use DMA
The ECP mode has to use the DMA channel, so choose the onboard parallel port
with the ECP feature. After selecting it, the following message will appear:
“ECP
Mode Use DMA. ” At this time, the user can choose between DMA channel [3] or
[1].
Power Status LED
This item sets how the system uses Power LED on the case to indicate the suspend/
sleep state. Settings are:
[Single] The Power LED blinks to indicate the suspend/sleep state.
[Dual] The Power LED changes its color to indicate the suspend/
sleep state.