MSI G52-S9617X1 - Manual (Page 22)

2-6
MS-9617 ATX Workstation Board
2. Position the heatsink/cooler onto the
retention modules. Connect the wires
to the fan power connector (CFAN1),
then press down the fan until its four
clips get wedged in the holes of the
retention modules. 1. Locate the CPU and its retention mod-
ules on the motherboard.
3. Hook one end of the clip into the hole
of the retention module, then push
down the handle to hook the other
end to the retention module. 4. Repeat step 3 on the other clip.
retention modules
fan power
handle
u For CPU1