Mazda MX-5 - Manual (Page 330)

Black plate (329,1)
3. Turn the center section of the plastic
retainers counterclockwise and remove
them, then remove the mudguard.
Removal
Installation
4. Turn the socket and bulb assembly
counterclockwise, and carefully pull it
backward.
5. Disconnect the socket and bulb
assembly from the electrical connector
by pressing the tab on the connector
with your finger and pulling it.
6. Install the new socket and bulb
assembly in the reverse order of
removal.
NOTE
l If the halogen bulb is accidentally
touched, it should be cleaned with
rubbing alcohol before being used.
l Use the protective cover and carton
of the replacement bulb to dispose of
the old bulb promptly out of the
reach of children.
Front turn signal lights
1. If you are changing the right front turn
signal light bulb, start the engine, turn
the steering wheel all the way to the
left, and turn off the engine. If you are
changing the left front turn signal light
bulb, turn the steering wheel to the
right.
2. Turn the screws counterclockwise and
remove them.
Maintenance and Care
Owner Maintenance
8-43
MX-5_8V80-EA-06F_Edition1 Page329
Monday, June 12 2006 12:58 AM
Form No.8V80-EA-06F