Motorola P930 - Manual (Page 43)

Timeport P930 Two-Way Pager Specifications 79
Timeport P930 Two-Way Pager Specifications
Physical Dimensions
Size 3.75 x 2.85 x 1.2 in
95 x 72 x 29 mm
Weight (w/battery) 6.7 oz
190 g
Volume 9.3 in 3
153 cc
Graphics Display
1/8 VGA 16 lines x 30 characters
240 x 160 pixels
4-level gray scale
EL backlighting
Message Area 9 lines x 27 characters
Power
Main Battery Pack 3.6 V NiMH
Charge Time 1 hr
Backup Cell rechargeable
Battery Life >7 days
Clock Retention Time
w/main battery removed 15 min
Max. Sound Pressure Level (at 12 inches) 72 dB
Memory
Total Memory 4.5 MB
4 MB Flash
3 MB (FLEX OS)
1 MB (Applications and Data)
512 KB RAM
Environment
Operating Temperature 32 ± to 122 ± F
0 ± to +50 ± C
Storage Temperature 14 ± to 149 ± F
-10 ± to +65 ± C
Electrostatic Discharge (no permanent damage) 15kV
80 Timeport P930 User’s Guide
Commonly Asked Questions
Your Timeport P930 Two-Way Pager is a dynamic messaging
device. It monitors and processes your communications even when
you are busy with other things. The following questions reflect
situations that may occur and are organized into four categories:
• Timeport P930 Two-Way Pager
• Messaging
• Battery and Charger
• FLEX PC Partner
Timeport P930 Two-Way Pager
Why won’t my pager power up?
Your Timeport P930 Two-Way Pager might not be accessing the
power it requires.
• Make sure you have a battery in the battery compartment. If
not, insert a fresh battery.
• Make sure the battery is inserted properly. Check that the +
marking on the battery is positioned on the two-contact side of
the battery compartment. Press the battery into the compart-
ment to ensure the battery is seated properly. For more infor-
mation, see “ To replace the battery:” on page 17.
• Recharge the battery or insert a fresh battery.
• If the front LED lights when you replace the battery and the
screen is still blank, your screen’s contrast may be too light.
Adjust the contrast.
My screen is too dark (or too light). How do I
change it?
You can quickly change the contrast by pressing , then holding
down until reaching the desired contrast. Your Timeport P930
Two-Way Pager also has a built-in calibration guide to help you
select the best contrast level. For more information, see “ Custom-
izing the User Interface” on page 50.
Periodically, the date and time are incorrect.
What causes this?
The clock will maintain its accuracy for about an hour after the
battery has been totally drained of power. To retain date and time
accuracy, replace the battery, as needed. During extended periods
of non-use (i.e., overnight), place your pager in the plugged-in
charger so the battery will be fully charged in the morning. While