Marantz VP8600 - Manual (Page 25)

20
ENGLISH
ITEM
PIP input
PIP Horizontal Shift
PIP Vertical Shift
PIP Window Size
DESCRIPTION
Press 1 2 to select the PIP input.
Press 1 2 to adjust the horizontal position of the PIP window.
(Range:–128 to 127)
Press
1 2 to adjust the vertical position of the PIP window.
(Range:–128 to 127)
Press
1 2 to adjust the size of the PIP window.
(Range:–128 to 127)
DEFAULT
*1
–128
–128
*1
Press Info. to open Information menu. The Information menu items are displayed only.
Information Menu
ITEM
Input
Resolution
Lamp Hour
DESCRIPTION
Displays the select input source.
Displays the resolution and H/V in PC mode.
Displays the color standard of the connected video device.
Number of hours lamp has been in use.
DEFAULT
These
items are
display
only.
Press MENU to open the OSD menu. Press 34 to move to the Config. menu and press
ENTER . Press 34 to move up and down in the Config. menu. Press 1 2 to adjust values and
press ENTER to confirm the setting.
Config. Menu (PC/HD and Video)
ITEM
H Keystone
V Keystone
Menu Position
Menu Timer
Language
Installation
Auto Input
Detection
Auto Power Off
Reset
DESCRIPTION
Press 1 2 to adjust the horizontal keystone.
(Range: –36 to 36)
Press
1 2 to adjust the vertical keystone.
(Range: –36 to 36)
Press
1 2 to select the menu screen position.
(Range: 1 (upper left) — 9 (bottom right)
Press
1 2 to select how long the menu is displayed.
(Range: Continue (OSD appears until manually closed)
— 10 Sec. — 20 Sec.)
Press
1 2 to change the language.
(Range: English; Français; Italiano; Deutsch; Español)
Press
1 2 to choose from four projection methods:
Front Desktop mount, front of screen
F+Ceiling Ceiling mount, front of screen
Rear Desktop mount, rear of screen
R+Ceiling Ceiling mount, rear of screen
Press 1 2 to enable/disable Auto Input Detection.
Note: When this setting is disabled, you need to select
the source manually.
When the Auto Power off is set to Enable , power to the
projector automatically shuts off if no signals are received
and no operations are performed for about 10 consecutive
minutes.
Resets all items in the
config. menu to the default values.
DEFAULT
0
0
4
Continue
English
Front
Disable
Disable
—
Press P-MENU in PIP mode to open PIP Configuration menu. Press 34 to move up and
down in the PIP Configuration menu.
PIP Configuration Menu
YP b P r
X
X
X
X
X
X
O
O
SCART
X
X
X
X
X
X
O
O
RGB
X
X
X
O
O
O
X
X
COMP.2
X
X
O
X
X
X
O
O
S-VIDEO
X
X
O
X
X
X
O
O
VIDEO
X
X
O
X
X
X
O
O
RGB
O
O
X
O
O
O
X
X
DVI
O
O
O
O
O
O
X
X
Main Input Source
PIP Source COMP.1
COMP.1
YP b P r
SCART
RGB
COMP.2
S-VIDEO
VIDEO
RGB
DVI
Information:
PIP operations may not function depending on the combination of input signals.
See the table below for details.
O: support X: Not support
*1 The default value depends on input signal.