Marantz VP8600 - Manual (Page 12)

7
ENGLISH
CONNECTION
S-VIDEO OUT
VIDEO OUT
VCR
S-video cable (commercially available)
Video cable
(commercially available)
❖
When making connections be sure to:
• Turn off all equipment before making any connections.
• Use the proper cables for each connection.
• Securely insert the plug into the port to connect cables. Loose cables can lead to trouble
and damage.
❖
When pulling out a cable:
• Be sure to grab the plug, not the cable itself.
Connect the supplied AC power cord into the AC IN socket of the projector.
Note:
Make sure the AC power cord is firmly connected into the AC IN socket.
Connection with AC Power Supply
You can connect this projector to a VCR, DVD player and other video equipment.
❖
Connecting a video source using S-VIDEO IN and VIDEO IN terminals.
1. Connect one of the S-video cable to the S-VIDEO IN terminal, or one end of the video
cable to the VIDEO IN terminal on the projector.
2. Connect the other end of the S-video cable or the video cable to the S-video output
terminal or video output terminal of the video source.
Connection with Video Equipments
❖
Connecting a DVD player to the COMPONENT VIDEO IN 1 or 2 terminal
(Devices can be connected to both terminals at the same time.)
1. Connect the individual terminals of the component video cable into the COMPONENT
VIDEO IN 1 or 2 terminal of the projector.
2. Connect the other end of the cable to the corresponding terminals on a DVD player.
COMPONENT 1: YP b P r
FL OFF STANDBY
FL OFF STANDBY
COMPONENT VIDEO OUT
COMPONENT VIDEO OUT
Component cable
(commercially available)
DVD Player
DVD Player
Component cable
(commercially available)