Mustek PP3000 - Manual (Page 68)

A - 12
TM
APP. A
STAR …
CODES (HEX/CONTROL) : 1B 41 n / “A” n
FUNCTION : Define n/72 inch line feed
DEFINITION RANGE : 0
≤ n ≤ 85 (Default n = 12)
DETAIL DESCRIPTION : This command defines line feed
spacing at n/72 inch. The actual line spacing will become the value defined by
this command whenever the “2” code after this command is received.
CODES (HEX/CONTROL) : 1B 42 n1
…nk 0 / “B” n1…nk <0>
FUNCTION : Set vertical tab position
DEFINITION RANGE :
1
≤ n1 < … < nk ≤ 255, 1 ≤ k ≤ 16
APPLICATION LIMIT : If a tab set position <nk> is equivalent to or
smaller than just preceding the tab set position, setting of vertical tab is
assumed as complete.
DETAIL DESCRIPTION : Cancels all current vertical tab positions and
sets new vertical tab positions at lines n1, n2, etc., where n1,n2, etc. are numbers
between 1 and 255. A maximum of 16 vertical tab positions can bet set. The tab
positions must be specified in ascending order; any violation of ascending order
terminates the tab position list. Standard termination of this command itself is
done by the <0> control code. The vertical tab positions are set in terms of the
current line spacing and do not move if the line spacing is changed later.
CODES (HEX/CONTROL) : 1B 43 n / “C” n
FUNCTION : Set page length at n lines
DEFINITION RANGE :
1
≤ n ≤ 255
DETAIL DESCRIPTION : Set page length at n lines.
CODES (HEX/CONTROL) : 1B 43 00 n / “C” <0> n
FUNCTION : Set page length at n inches
DEFINITION RANGE : 1
≤ n ≤ 127
DETAIL DESCRIPTION : Set page length at n inches.