Mustek PP3000 - Manual (Page 61)

A - 5
TM
APP. A
STAR …
CODES (HEX/CONTROL) : 13 /
FUNCTION : Set deselect mode
DETAIL DESCRIPTION :
1. When using serial interface printer
This function differs depending on the setting of DIP switch 4.
a) When the DC1, DC3 invalid mode is set (DIP switches 4-1 to 4-4 are all
set to ON), the printer ignores this code.
b) In the DC1, DC3 valid mode (with DIP switches 4-1 to 4-4 set to OFF),
data following this code is ignored when the printer receives a
code.
The deselect mode is canceled by code.
c) If the printer receives a code during an addressable mode (with
DIP switches 4-1 to 4-4 set to settings other than a) and b) above), the data
following this code is ignored.
Deselect mode can be canceled by a n code.
Note that addressable mode is valid only when the RS-422A interface
option is installed.
2. When using parallel interface printer
Data following this code is ignored when the printer receives a code.
The deselect mode is canceled by code.
CODES
(HEX/CONTROL) : 14 /
FUNCTION : Cancel expanded character mode
DETAIL DESCRIPTION : Cancel expanded character mode set by
code (Data following this code is printed out in normal size characters).
CODES (HEX/CONTROL) : 18 /
FUNCTION : Cancel print data in buffer
DETAIL DESCRIPTION :
1. When using serial interface printer
Clears the data buffer and the line buffer
Clears the data buffer in the STX-ETX mode, and terminates the STX-ETX
mode.
2. When using parallel interface printer
Clears the data buffer and the line buffer