Muratec MFX-2550 - Manual (Page 59)

2-4 Making Copies
Select the copying method.
3
Select [Long Edge] or [Short Edge], and press [Enter]
4
.
Refer to the description on the next page to select the binding position. When copying a two-
sided document, select the binding position of the document. When copying a one-sided
document, select the binding position of the copy.
Press
5
.
On MFX-2550, the following message will appear when the front side is scanned.
When you copy on MFX-2570 using the ADF, this will complete the operation. •
When you copying on MFX-2550 • with [1  2 sided] using the ADF, this will complete the
operation.
Insert the backside
6
of the duplex document, and press .