Muratec MFX-2550 - Manual (Page 109)

4-8 Cleaning the Printer
Cleaning the Printer
Cleaning the Drum Charge Wire and the Print Head
When the following message is displayed, or you are experiencing poor print quality, the
charge wire needs to be cleaned.
Note
Your machine will print approximately 100 pages after this message appears, after
the maximum number of prints has been reached the machine will display a “Printer
Not Usable” message and will not allow any further print jobs to take place. This will
prevent your machine from becoming permanently damaged.
Open the front cover.
1
Gently pull the blue cleaning rod toward you, making sure it fully extends. Then
2
return the rod to its original position. This operation also cleans the print head.
Close the front cover.
3