Multi-Tech Systems ISIHP-2S - Manual (Page 56)

Software/Driver Installation
56 MultiModemISI Hybrid Series, ISIHP-2S/2U
8. The Multi_View utility initializes the multiple-page capability of
terminals with multiple pages of memory. You are asked how many
pseudo devices (the total number of pseudo devices you want to
make available to the Multi_View utility) to create. This is the total
number of devices available to all Multi-Tech’s terminals. You can
have a maximum of 256 pseudo devices in your system.
9. The confirmation screen lists the values you selected. If these
values are correct, type Y and the installation process continues.
If there is an error in any of the values displayed, type N and the
first screen displays. Then reenter the information for each card.
When you accept the confirmation list (by typing Y), a series of
messages displays while the driver is being installed and the kernel
rebuilt. When the display finishes, press ENTER to continue. When
Installation complete displays, press ENTER .
10. Select Host and press ENTER. Remove the diskette from the
drive.
11. Select Exit and press ENTER.
12. To reboot the system, enter the following commands:
Type sync and press ENTER.
Type sync again and press ENTER.
Type haltsys and press ENTER.
Driver installation for the ISIHP-2S/2U card now is complete.
Activating Ports in SCO Open Server 5
SCO Open Server 5 provides a device database that monitors the
activity of serial ports through which users can log onto the host. If
your ISI ports are used by terminals (e.g., to allow users to log onto
your host), you must create an entry in the system’s device database
that furnishes specific information for the terminals that will be used
on each ISI port. The database is referenced each time a user attempts
to log in. If there is no database entry for a particular terminal, access
to the host is denied.
1. Turn on your system, noting that the firmware for each ISIHP-2S/
2U loads successfully. If the firmware for a given ISIHP card does
not load, none of its ports will be accessible. (If this happens, see