Multi-Tech Systems ISIHP-2S - Manual (Page 32)

Software/Driver Installation (Windows 95)
32 MultiModemISI Hybrid Series, ISIHP-2S/2U
To Remove the ISIHP-2S/2U Card and Drivers in
Windows 98
To remove the ISIHP-2S/2U card:
1. Re-boot your computer.
2. Click Start, Settings, Control Panel, and then System.
3. The System Properties dialog box appears . Click the Device
Manager tab.
4. Click Multi Port Adapter and select MultiTech ISIHP-2S/2U
2BRI/4 56K Hybrid Card. Then click Remove.
To remove the drivers:
1. Click Start, Settings, Control Panel, and then double-click Add/
Remove Programs.
2. Select MultiTech ISI Card and then click Add/Remove.
Removing the Driver
1. Click Settings, Control Panel; then double-click Add/Remove
Programs.
2. From the list box, select ISICOM Driver.
3. Click Add/Remove and follow dialog box instructions.
Installing TAs & Modems to COM Ports in Windows 95 /98
To install terminal adapters:
1. Click Start, Settings, Control Panel, and then double-click the
Modems icon.
2. If no modems are currently installed, the Install New Modem
dialog box appears. Check the box marked Don't detect my
modem; I will select it from a list. Then click Next.
If other modemshave been installed, the Modems Properties
dialog box will appear.