Multi-Tech Systems MT5600SMI-34 - Manual (Page 106)

Chapter 7 – Voice Commands
Multi-Tech Systems, Inc. SocketModem MT5600SMI Developer’s Guide 106
Command: +VGT Voice Gain Transmit (Playback Volume)
Description: This command causes the modem to set the volume level.
Syntax: +VGT=
Defined Values: Decimal number corresponding to the volume level.
Reporting Current or Selected Values:
Command: +VGT?
Response:
Example: 128 For the default setting.
Reporting Supported Range of Parameter Values:
Command: +VGT=?
Response: range
Example: 0-255
Result Codes: OK = 0-255.
ERROR Otherwise, or if not in Voice Mode.
Command: +VIT Voice Inactivity Timer (DTE/Modem)
Description: This command sets the modem’s initial value for the DTE/modem inactivity
timer.
Syntax: +VIT=
Defined Values: Decimal number corresponding to the time in units of 1.0 second.
A value of 0 disables the timer.
Reporting Current or Selected Values:
Command: +VIT?
Response:
Example: 0 For the default setting.
Reporting Supported Range of Parameter Values:
Command: +VIT=?
Response: range
Example: 0-255
Result Codes: OK = 0-255.
ERROR Otherwise, or if not in Voice Mode.