Connecting an a/v receiver, tv, and vcr – Motorola QIP6200/QIP64xx User Manual
Page 42
36
Connecting an A/V Receiver, TV, and VCR
If your equipment supports it:
•
The optical (square
SPDIF
connector) or coaxial (round
SPDIF
connector) audio outputs may be used in place of the stereo audio
outputs (
AUDIO R
and L). In most cases, these outputs offer a higher
level of audio quality, including support for Dolby Digital 5:1
surround sound.
•
S-video connections may be used in place of the standard RCA
video connections. In most cases, S-video offers a higher level of
standard definition video quality than RCA video.
This video connection method does not support HD video. For
connecting an HDTV, see “Connecting Your Set-Top to an HDTV –
Video Only.”
1
Connect an RF coaxial cable to the service provider’s wall outlet
and to the
CABLE
IN
connector on the set-top.
2
Connect a stereo audio cable to the
AUDIO OUT R
and
L
connectors
on the set-top and to the
INPUT R
and
L
connectors on the
A/V receiver.
3
Connect a video cable to the
VIDEO OUT
connector on the set-top
and to the
CABLE
/
TV VIDEO
connector on the A/V receiver.
4
Connect a stereo audio cable to the
VCR AUDIO OUT R
and
L
connectors on the A/V receiver and to the
INPUT AUDIO R
and
L
connectors on the stereo VCR.
5
Connect a stereo audio cable to the
OUTPUT AUDIO OUT R
and
L
connectors on the stereo VCR and to the
VCR AUDIO IN R
and
L
connectors on the A/V receiver.
6
Connect a video cable to the
INPUT VIDEO
connector on the stereo
VCR and to the
VIDEO VCR OUT
connector on the A/V receiver.
7
Connect a video cable to the
OUTPUT VIDEO
connector on the stereo
VCR and to the
VIDEO VCR IN
connector on the A/V receiver.
8
Connect a video cable to the
INPUT VIDEO
connector on the stereo
TV and to the
TV
/
MONITOR OUTPUT
VIDEO
connector on the A/V
receiver.